products

products categories

Download

Download Download file and products catalogue for equipment.

contact us

  • If you have questions, please contact us, all questions will be answered
  • Tel : +86 18030236818
  • Fax : +86-592 5237901
  • Email : dexing@china-dexing.com

hot products

  • DX-100 Hall Effect Measurement System

  • DX-2012HC soft magnetic material coercivity measuring device

  • DX-330F 3D Fluxgate Magnetometer

  • DX-105 Gauss Meter

  • DXSB Double-Yoke Double-Tuning Adjustable Air Gap Electromagnet

  • 3 Axis Helmholtz Coils

DXT8 Three dimensional magnetic field probe station

The one-dimensional, two-dimensional, and three-dimensional magnetic field probe platforms provided by the company are all made of non-magnetic materials. Three pairs of one-dimensional, two-dimensional and three-dimensional Helmholtz coils are placed orthogonally to generate one-dimensional, two-dimensional and three-dimensional magnetic fields.

contact now

DXT8 Three dimensional magnetic field probe station


Introduction:

The one-dimensional, two-dimensional, and three-dimensional magnetic field probe platforms provided by the company are all made of non-magnetic materials. Three pairs of one-dimensional, two-dimensional and three-dimensional Helmholtz coils are placed orthogonally to generate one-dimensional, two-dimensional and three-dimensional magnetic fields. The coil can be air-cooled (small magnetic field) or water-cooled (large magnetic field), and is equipped with a coil overheating protection device. The output current of each dimension can be controlled by the buttons on the software or the power control panel, and the vector magnetic field in any direction in space can be generated. The probe stage is equipped with a movable sample stage, which can realize two-dimensional movement and 360-degree rotation of the sample stage in the horizontal direction, which is convenient for sample installation and testing. The probe station has four high-precision probe arms and a high-precision electron microscope to facilitate the observation and operation of small samples. The probe can test chips, wafers, packaged devices, etc. through DC or low-frequency AC signals.


Application scope:

It is widely used in the fields of semiconductor industry, MEMS, superconductivity, electronics, ferroelectronics, physics, materials science and biomedicine. The three-dimensional probe station is matched with the high-precision bipolar power supply independently developed by our company. Through the output of the true bipolar power supply, the vector field synthesis in any direction in space is realized.


Parameter:

Model

T8-500-3

T8-300-3

T8-100-3

Material

all models are non-magnetic

Magnetic field range

500Gs

300Gs

100Gs

Magnetic field uniformity

1% in 50mm sphere in central area

Angular resolution

0.02°

Probe length

38mm

Probe diameter

0.15mm

tip diameter

10μm/5μm/1μm

Microscope

10. Y-plane 2 * 2inch, accuracy 1 um, z-axis stroke ≥ 50.8mm, optional laser loading


Note:

※The maximum need to measure a few inches of wafers or devices! Do you need to test fragments or single chips! The smallest single chip size!

※How high is the mechanical precision requirement of the probe station!

※Point to measure the electrode size of the sample! 100μm *100μm or 60μm *60μm pad, or mini pad made by FIB, or metal circuit inside ic!

※At most, several probes are needed to measure at the same time!

※Whether the probe card test will be used!

※How much do you need to use the minimum resolution of an optical microscope!

※For the microscope, do you need to add a polarizer for LC liquid crystal hot spot detection!

※During the probe point measurement, whether the current requirement reaches 100fa or below! Low

Is the capacitance requirement to be 0.1pf! Is there RF demand!

※What are the test instrument interfaces connected!

※Whether heating or cooling is needed when testing the environment! Do you need to seal the cavity!

※How about the leakage requirements of chuck! Do you need to add low impedance chuck!

※Do you need a shockproof table!

※If an anti-vibration table is added, is there compressed air


inquiry now

    We will give you a quotation within 24 hours.

    Contact Us:

    Company:    DEXING MAGNET TECH. CO., LIMITED.

    Tel:    +86 18030236818
    Email:    dexing@china-dexing.com
Main Products
  • DX-2012HC Soft Magnetic Material Coercivity Measuring Device

    DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.

  • DX-100 Hall Effect Measurement System

    DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.

  • DX-9000 Series Vibration Sample Magnetometer

    DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.

  •  DX-2100AM Magnetization Angle Measurement System

    The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.