products categories
contact us
- If you have questions, please contact us, all questions will be answered
- Tel : 18030236818
- Fax : +86-592 5237901
- Email : dexing@china-dexing.com
DXF2030 Programmable Power Current Source
1mA high resolution, high current +/-10A, effective voltage 100V, high power current source with scanning function; Configure RS 232C (serial port) / USB computer interface; Suitable for Helmholtz coil excitation power and electromagnet power supply.
contact nowDXF2030 Programmable Power Current Source
Product characteristics:
Output current: -10A-+10A DC—suitable for Helmholtz coil and small eletromagnet
High resolution:0. 1mA
High accuracy: 0.2%
High stability:<0.1%@10A
Effective voltage range: 0-100V
Max output power: 1000W
Load DC resistance range: 0-10Ω
Ground relations: floating output’
Computer interface: RS-232 (serial port), USB
Output current:
·Output range -10A-10A DC
·Min. step: 0.1mA
·High accurancy ±(0.2% step up +5mA) Stability better than ±0.1%@10A
·Noise/Ripple:10mA RMS Typical Value @10A
·Max output power: 1.0Kw
Output voltage
·Range of effective output voltage 0V-100V DC
·Open circuit output voltage:120V±8V @10A
Current Reverser
·Microprocessor controlled relay reverse mode and 5 models to choose for delay time
·Shock of reversal current smaller than 1mA
Load adaptability
·Loading DC resistance range of full input 0-10Ω
·Output impedance >1mΩ
·Interior collocation output makes up to network
Load protection
·Controllable output end state
·Mode of linear Gradients deals with mutational current setting
·Rate of current linear Gradients 0.01A/S-2A/s
·Interior overpower protection
Scanning function
·Ⅰ,Ⅰ-Ⅲ,Ⅰ-Ⅲ-Ⅰquadrant three scanning modes
·Rate Range of linear scan: 0.01A/s, setting range of max scanning current: 1mA-10A DC
Automatically control
·Standard equipment with RS-232 computer interface and easy-to-use interface
·Standard equipment with inner USD-RS-232 exchange interface
·Complete computer command set
·Function of trigger output synchronization
·Function of timed continuous trigger output in the process of scanning
Interaction capability
·White backlight FSTN LCD display
·Essential LED state indicator
·3*4 keys interactive function keyboard operation matched display and indicator
Standard specification
·Offer manual for users
·Standard 3U bench top instruments, AC 110V/50Hz (with transformer 220V/110V)
inquiry now
We will give you a quotation within 24 hours.
-
DX-2012HC Soft Magnetic Material Coercivity Measuring Device
DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.
-
DX-100 Hall Effect Measurement System
DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.
-
DX-9000 Series Vibration Sample Magnetometer
DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.
-
DX-2100AM Magnetization Angle Measurement System
The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.