products

products categories

Download

Download Download file and products catalogue for equipment.

contact us

  • If you have questions, please contact us, all questions will be answered
  • Tel : +86 18030236818
  • Fax : +86-592 5237901
  • Email : dexing@china-dexing.com

hot products

  • DX-100 Hall Effect Measurement System

  • DX-2012HC soft magnetic material coercivity measuring device

  • DX-330F 3D Fluxgate Magnetometer

  • DX-105 Gauss Meter

  • DXSB Double-Yoke Double-Tuning Adjustable Air Gap Electromagnet

  • 3 Axis Helmholtz Coils

DXT-D30 High and low temperature magnetic field probe station

The configuration of the probe station is mainly selected and designed according to the needs of users. For example, the required magnetic field model, power supply model, magnetic field value, sample table size, etc. in addition, the probe table can be used in combination with the high-precision bipolar constant current power supply independently developed by our company

contact now

DXT-D30 High and low temperature magnetic field probe station


Introduction:

The configuration of the probe station is mainly selected and designed according to the needs of users. For example, the required magnetic field model, power supply model, magnetic field value, sample table size, etc. in addition, the probe table can be used in combination with the high-precision bipolar constant current power supply independently developed by our company, which can improve the high stability of the magnetic field. Therefore, this type of probe table is mainly designed and optimized according to the use situation of customers.


technical parameter:

①Magnetic field model: EM3 extended version

②Power supply model: JP10-40, better than 50ppm

③Magnetic field value:>1000Gs@60mm pitch

④Magnetic field resolution: better than 0.1Gs

⑤Three-dimensional probe holder: 4 high-precision three-dimensional probe holders

⑥The diameter of the stage: 30mm

⑦Y-axis displacement -15mm to 200mm, accuracy is better than 10 microns

⑧X-axis displacement ±15mm, accuracy is better than 10 microns

⑨Z axis stroke is 10mm, accuracy is better than 20 microns

⑩R axis rotation: 360 degree coarse adjustment, fine adjustment within ±5°, fine adjustment accuracy 10'

⑪Microscope: Stereo microscope, the zoom range is better than 10-150 times.

⑫The machining accuracy is better than 10 microns.


Instruction for use:

1. Connect the Hall probe to the DB15 interface on the back panel of the Gauss meter; insert the DC9V power adapter into the power supply interface on the back panel of the Gauss meter; if you use a computer for remote communication, you must also use a serial cable to connect the DB9 interface on the back panel of the Gauss meter to the computer Serial port.

2. Plug the DC9V power adapter into the 220VAC socket, and the Gauss meter can be powered on. At this time, the red indicator on the front panel of the Gauss meter flashes and the LCD screen displays the magnetic field data.

3. Probe zero calibration: move the Hall probe away from the magnetic field and observe whether the Gauss meter display is zero; if the display is not zero, you need to zero the Hall probe; move the probe away from the magnetic field or put it in a zero Gauss cavity ( It is recommended to extend the probe tip into the zero-gauss cavity in parallel at this time, and do not touch the cavity wall), then open the serial port debugging tool on the computer, and input the "zero" command to the Gauss meter to calibrate the probe.

4. Probe direction recognition: The Hall probe T-300 is a transverse probe, and the magnetic field sensitive element is located about 3mm from the front of the probe; when the Hall probe handle with the mark "Jin Zhengmao" faces the N pole of the magnetic field, Gauss The meter shows that the magnetic field value is positive; otherwise, it is negative.

5. The instrument is set up and enters the normal measurement state.





inquiry now

    We will give you a quotation within 24 hours.

    Contact Us:

    Company:    DEXING MAGNET TECH. CO., LIMITED.

    Tel:    +86 18030236818
    Email:    dexing@china-dexing.com
Main Products
  • DX-2012HC Soft Magnetic Material Coercivity Measuring Device

    DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.

  • DX-100 Hall Effect Measurement System

    DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.

  • DX-9000 Series Vibration Sample Magnetometer

    DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.

  •  DX-2100AM Magnetization Angle Measurement System

    The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.