products categories
contact us
- If you have questions, please contact us, all questions will be answered
- Tel : 18030236818
- Fax : +86-592 5237901
- Email : dexing@china-dexing.com
Moke Hysteresis Loop Measuring Instrument
Hich-precision characterization of the maanetism of ferromacnetism, artificial antiferromaanetism, two-dimensional materials and microelectronic devices using the maneto-optical Kerr effect, The in-plane and vertical magnetic fields can be applied atthe same time, and the in-plane macnetization component and the vertical magnetization component can be scanned simultaneously
contact nowMoke Hysteresis Loop Measuring Instrument
Product Instruction
Hich-precision characterization of the maanetism of ferromacnetism, artificial antiferromaanetism, two-dimensional materials and microelectronic devices using the maneto-optical Kerr effect, The in-plane and vertical magnetic fields can be applied atthe same time, and the in-plane macnetization component and the vertical magnetization component can be scanned simultaneously, that is, the hvsteresis oop of anv combination of the in-plane maonetic field/vertica maanetic field-in-planecomponent/perpendicular component can be obtained at the same time. The detection accuracy of Kerr rotation anale is ashigh as 0.3 mdeg (RMS), and it can detect the maanetization of single atomic laver. A wire-tie sample holder is provided forthe characterization of electrica -magneto-optical propertiesThe product is independently developed by the company, with strong stability and good scalability, and provides customizedservices: compared with similar equipment in the same industry, it has a larger maanetic field and higher precision, and canachieve in-plane and vertical hysteresis loop measurements without chancing the optical path, lt is laser automatic alionmenthighly intelligent software support.
Equipment Performance
Magnetic field: in-plane 1.0 T, vertical 1.0 T;
Minimum Kerr angle detection:0.3medg(RMS);
Temperature range: 4K~500 K (expansion option);
Maximum Sample Size:15mm×15mm
Equipment Features
Quadrupolevector magnet: In-planemagnetic field strength:
>1.0 T@8 mm Air Gap >0.5 T@16 mm Air Gap
Highly focused laserbeam spot :
As small as 250 um, users canobtain The figure on the right shows that at a magnetic field scanning frequency of o.5HzKerr rotation test results obtained by averaging different number of turns.The results show that the noise of the sample is 58% without averaging in a single cycle, and the minimum Kerr rotation angle detection degree after multiple cycles is O.5mdeg. fine local magneticinformation
Vertical MagneticField Strength :
>1.0 T 7 mm Air Gap >0.5 T@16 mm Air Gap
Integrated gaussmeter sample holder :
Integrated design, multi-range selection, thehighest magnetic field resolution is less than 0.02 mT, and the collected magnetic field is closeto the real magnetic field of the sample
Five-Axis Sample Stage :
Laser real-time automatic alignment function.
Applications
Research on Polar Kerr Test of Perpendicular Magnetic Anisotropic Thin Films :
Kerr test at room temperature for perpendicular magnetic anisotropy thin W(5nm)/CoFeB(1nm)/Mgo(2nm)/W(5nm)
inquiry now
We will give you a quotation within 24 hours.
-
DX-2012HC Soft Magnetic Material Coercivity Measuring Device
DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.
-
DX-100 Hall Effect Measurement System
DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.
-
DX-9000 Series Vibration Sample Magnetometer
DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.
-
DX-2100AM Magnetization Angle Measurement System
The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.