products

products categories

Download

Download Download file and products catalogue for equipment.

contact us

  • If you have questions, please contact us, all questions will be answered
  • Tel : +86 18030236818
  • Fax : +86-592 5237901
  • Email : dexing@china-dexing.com

hot products

  • DX-100 Hall Effect Measurement System

  • DX-2012HC soft magnetic material coercivity measuring device

  • DX-330F 3D Fluxgate Magnetometer

  • DX-105 Gauss Meter

  • DXSB Double-Yoke Double-Tuning Adjustable Air Gap Electromagnet

  • 3 Axis Helmholtz Coils

DX-2012MQ rare earth permanent magnet material quality testing device

The DX 2012MQ rare earth permanent magnet material quality test device uses a fluxmeter to configure a one dimensional Helmholtz coil, which is mainly used to measure the magnetic flux of the permanent magnet device under the condition of the coil, multiplying the coil constant to obtain the magnetic moment of the device. For the size of the sample, the materials Br, Hcb, and BHmax can be derived.

contact now

DX-2012MQ rare earth permanent magnet material quality testing device


The DX-2012MQ rare earth permanent magnet material quality test device uses a fluxmeter to configure a one-dimensional Helmholtz coil, which is mainly used to measure the magnetic flux of the permanent magnet device under the condition of the coil, multiplying the coil constant to obtain the magnetic moment of the device. For the size of the sample, the materials Br, Hcb, and BHmax can be derived. It has been verified by experiments that the one-dimensional coil test axially magnetized cylindrical, circular and square rare earth permanent magnet samples can accurately test the total magnetic moment M of the material (accurately Mz), using the material BH demagnetization curve close to The straight line can accurately calculate the three important parameters Br, Hcb and BHmax of the magnetic properties of the material, so as to judge the quality of the material, which is very good for the quality transfer of rare earth permanent magnet materials between materials companies and materials users. In the middle, the accuracy and repeatability of the magnetic moment test is far superior to the standard sample transfer data measured by the BH test instrument. The high test efficiency can realize the full inspection of all the magnetized samples, and the defects of the device can be found in time, and the material can be guaranteed. The judgment of the level of magnetic energy product.


Features

● Adopting single-chip design, the program is automatically calculated, which is intuitive and convenient;
● Suitable for all rare earth permanent magnet materials, low equipment cost;
● It is convenient to measure the magnetic flux Ø and magnetic moment M of the material and calculate the data such as Br, Hcb and BHmax;
● It can measure rare earth samples of different sizes and is no longer limited by sample size;
● The non-magnetic heating ceramic furnace can be added, and the M-T curve of the rare earth permanent magnet is obtained by heating test;
● It can be used for rare earth permanent magnet materials for thermal stability and magnetic flux irreversible inspection;
● The fluxmeter uses low drift technology to make the test more stable and accurate.

Technical indicators
● Power supply: AC 220V/0.5A
● Test range: 1mWb, 10 mWb, 100 mWb, 1000 mWb fourth gear
● Corresponding input impedance: 1k ohm, 10k ohm, 100k ohm, 1000k ohm
● Test accuracy: 0.5%
● Drift: 1uWb / minute
● Minimum resolution: 0.1uWb (corresponding to 2mwb range)
● Volume: 285mm × 300mm × 100mm, weight: 3kg; (width * depth * height)
● Operating environment: 0 °C to +50 °C, humidity: 35 to 80%.

1. SmCo28H sample size: L20mm×W10mm×5mm, the test data using FE-2100H permanent magnet material measuring device is as follows: Br=10.83kGs, Hcb=10.26kOe, Hcj≥30kOe, BHmax=27.78MGOe.
One-dimensional Helmholtz coil is configured with DX-2012MQ rare earth permanent magnet material quality test device (urec is calculated according to 1.05)

image.png


The test repeatability is excellent. The difference between the Br test accuracy and the BH test device is controlled within 0.6%, the magnetic permeability coefficient is calculated as 1.05 (accurate optimization can be performed), the Hcb deviation is within 1.56%, and the BH deviation is 1.04%.
 
2. N30M sample size: D13.08mm×H6.35mm, the test data using FE-2100H permanent magnet material measuring device is as follows: Br=11.06kGs, Hcb=10.68kOe, BHmax=29.53MGOe.
One-dimensional Helmholtz coils (urec calculated according to 1.05) were constructed using the DX-2012MQ rare earth permanent magnet material quality tester:

image.png

The test repeatability is excellent. The accuracy of the Br test is 0.2% compared with the BH test device. The magnetic permeability coefficient is calculated according to 1.05 (accurate optimization can be performed), the Hcb deviation is within 1.55%, and the BH deviation is 1.75%.


DX-2012MQ-rare-earth-permanent-magnet-material-quality-testing-device-6

DX-2012MQ-rare-earth-permanent-magnet-material-quality-testing-device-1

inquiry now

    We will give you a quotation within 24 hours.

    Contact Us:

    Company:    DEXING MAGNET TECH. CO., LIMITED.

    Tel:    +86 18030236818
    Email:    dexing@china-dexing.com
Main Products
  • DX-2012HC Soft Magnetic Material Coercivity Measuring Device

    DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.

  • DX-100 Hall Effect Measurement System

    DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.

  • DX-9000 Series Vibration Sample Magnetometer

    DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.

  •  DX-2100AM Magnetization Angle Measurement System

    The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.