products

products categories

Download

Download Download file and products catalogue for equipment.

contact us

  • If you have questions, please contact us, all questions will be answered
  • Tel : +86 18030236818
  • Fax : +86-592 5237901
  • Email : dexing@china-dexing.com

hot products

  • DX-100 Hall Effect Measurement System

  • DX-2012HC soft magnetic material coercivity measuring device

  • DX-330F 3D Fluxgate Magnetometer

  • DX-105 Gauss Meter

  • DXSB Double-Yoke Double-Tuning Adjustable Air Gap Electromagnet

  • 3 Axis Helmholtz Coils

Magneto-optic Kerr Effect System

The surface magneto--optic Kerr effect (SMOKE) system offered by Dexing Magnet is a high - sensitivity magnetometer. The hysteresis loop of the sample can be obtained by detecting the change of reflection intensity on the surface of the magnetic sample, and the Kerr angle and ellipsometry of the sample can be calculated by the hysteresis loop.

contact now

Magneto-optic Kerr Effect System


The advantages of the surface magneto-optic Kerr system over other magnetic measurement systems are as follows: the single point of micromagnetism of the sample can be tested and the anisotropy of the material can be easily tested. The surface magneto-optic Kerr effect (SMOKE) system is used to study magnetic thin films. Magnetic nanostructures and magnetic anisotropy are idea tools.


SMOKE-1


Testable Material

1. Recording magnetic head;
2. Magnetic film;
3. Special magnetic medium;
4. Magnetic field sensor.

 

Application

1. Magnetic nanotechnology;
2. Spintronics/magnetoelectronic;
3. Magnetic random access memory.
4. GMR/TMR.

SMOKE-2

Basic Functions

1. Kerr effect test of longitudinal, transverse and poloidal.
2. 360-degree electric rotation sample, the anisotropy of the sample can be tested.
3. The Kerr effect at different points on the surface of the sample can be measured by manual displacement of sample, both left and right and up and down.
4. The sample holder is provided with an electrical interface, and a magnetoelectric coupling test can be added.

SMOKE-6


Main Characteristics

  1. The magnetization of different parts of the same sample can be measured.
    2. High measurement sensitivity, good stability, low noise.
    3. Non-contact measurement, it is a non-destructive measurement.
    4. Wedge-shaped magnetic thin films with varying thickness of the same sample can be measured.
    5. The sample can be measured placed in a vacuum in-situ.

    SMOKE-5


    Technical Parameter

    1. Kerr angle resolution: 0.001 degrees.
    2. Ellipsometry resolution: 0.1%.
    3. Minimum light spot: 10 microns.
    4. Maximum magnetic field: single-dimension 0.26 Tesla.
    5. Sample electric angle step 0.1 degrees, manual displacement step 10 microns.
    6. Noise: 1%.


    Low Temperature Option

    1. Temperature range: 100K ~ 300K.
    2. Temperature control accuracy: ±0.01 ℃.
    3. Cooling time: 30 min to 100K.
    4. Heating rate: 0. 01 ~ 30 ℃ / min.
    5. Sample is in vacuum environment.
    6. K9 glass optical window, minimizing magneto-induced optical rotation.

SMOKE-7

inquiry now

    We will give you a quotation within 24 hours.

    Contact Us:

    Company:    DEXING MAGNET TECH. CO., LIMITED.

    Tel:    +86 18030236818
    Email:    dexing@china-dexing.com
Main Products
  • DX-2012HC Soft Magnetic Material Coercivity Measuring Device

    DX 2012HC soft magnetic material coercivity measuring device is mainly used for rapid measurement of soft materials including: pure iron and carbon steel, soft ferrite, magnetic powder and other regular and irregular open circuit samples, and the test method is reliable.

  • DX-100 Hall Effect Measurement System

    DX 100 Hall effect test system can be divided into normal temperature, high temperature, low temperature, high and low temperature Hall effect test system; It is used to measure the carrier concentration, mobility, resistivity, Hall coefficient, etc. of semiconductor materials; It is an essential tool for studying the electrical properties of semiconductor materials.

  • DX-9000 Series Vibration Sample Magnetometer

    DX-9000 series vibrating sample magnetometer is a kind of magnetometer developed by Xiamen Dexing Magnet Tech. Co., Ltd. The main research and development of the magnetic material measurement system is a new generation of products based on the electromagnet platform.

  •  DX-2100AM Magnetization Angle Measurement System

    The DX 2100AM magnetization angle measurement system is connected to the independent three component fluxmeter by a three dimensional Helmholtz coil to form a hardware test part;Through a microcomputer conversion of the test data of three components, a complete magnetization angle measurement system is formed.